However, we highly recommend that you first spend some additional time indoors with this manual and your camera until you know a bit more about what the 3-way switch and direction keys do. ApplicationsThe Prime L20 Trail Camera can be used as a trail camera for hunting or scouting game. The Prime L20 Trail Camera will take photos or videos automatically (according to its current parameter settings) when it is triggered by the PIR sensors detection of activity in the area it covers. - Date / Time resets periodically. We appreciate your business and want to earn your trust. Important Note. The latest from Wildgame several new trail cameras for 2016, with the PROOF Camera 02 ($161) an excellent . If the SD card is not installed correctly, the device will not display an SD card icon on the LCD in SETUP mode (the SD card icon displayed after switching to SETUP mode will have a lock symbol inside it in it if the card is locked). Make sure that you are using a good quality SD card in your camera. HOME; CENNIK; BIURO; OFERTA; KONTAKT The Prime L20 Trail Camera will take photos or videos automatically (according to its current parameter settings) when it is triggered by the PIR sensors detection of activity in the area it covers.You can either move the power switch directly from OFF to ON mode or stop at the AIM position first to change one or more settings, then move the switch to ON after you have finished doing so.AIM MODEIn the AIM mode, you can check and change the settings of the Prime Trail Camera with the help of its built-in LCD. Please note, that the PIR is strongly sensitive to ambient temperature. (do not leave it in AIM). SD and SDHC (High Capacity) cards up to a maximum of 32GB capacity are supported. Check the Sensor Level (PIR sensitivity) parameter setting. Through the file format suffix, you can distinguish whether the file is a still photo (with suffix . Description. However, there is no guarantee that interference will not occur in a particular installation. During use, the LED will not flash when the camera takes an image. If it does not blink, that position is outside of the sensing area. Prime L20 Trail Camera to obtain maximum battery life. These settings, found in the SETUP Menu, let you change the photo or video resolution, interval between photos, switch the time imprint on, etc. Free in-store pickup at Baton Rouge, LA. Insert the SD card into the card slot with its label side upwards (see below). Be the first to write one: Write Review. Switch the Prime L20 Trail Camera to the AIM mode. Resolution: 20 MP Memory: 32 GB Color: Tan Battery Type: AA Battery Life: Up to 12 months Additional Features: Video recording Bulb Type: Low Glow. : Repairs 140 Great Gulf Drive, Unit B Vaughan, Ontario L4K 5W5, For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. Ever since we moved to Sequim on the Olympic Peninsula in 2017, I have wanted to capture photos and videos of the critters that often visit our front and bac. Bushnell 119930CWM: The Bushnell Prime L20 isn't about getting by or cutting corners, its about loading every bit of Bushnell's proven performance, image quality, and reliability into a trail camera every hunter can count on in the field at a price that's easy on the budget. Once in the ON mode, no manual controls are needed or possible (the control keys have no effect). Use UP/DOWN to set the minute. Shipping and payments. In some cases, other devices may change the formatting of the SD card so that it will not work properly with the Prime L20 Trail Camera. These settings, found in the SETUP Menu, let you change the photo or video resolution, the interval between photos, switch the time imprint on, etc. If you have multiple images where fast-moving subjects produce streaks on the photo, try the 3MP setting instead. CAMERA COLOR: CAMO. These False Triggers are the result of placing the camera in an environment where there is motion associated with tree branches creating motion in front of the camera or an area where there is high heat in the foreground and any motion from wind could set off the camera. We and our partners use data for Personalised ads and content, ad and content measurement, audience insights and product development. Although that may only take you a minute, there are some important notes about both batteries and SD cards you should be aware of, so please take the time to read the following directions and cautions:Loading BatteriesAfter opening the latch on the right side of the Prime L20 Trail Camera, you will see that the Prime L20 Trail Camera has a battery release button. 4. For warm environ- mental conditions, set the Sensor Level to High and for cold weather use, set the sensor for Low. IMPORTANT NOTECongratulations on your purchase of one of the best trail cameras on the market! When the display flashes, you can use the UP and DOWN keys to change the setting of the currently selected option or item. Continue with Recommended Cookies, Home Bushnell Bushnell 119930M Prime L20 Trail Camera Instruction Manual, PRIME L20 TRAIL CAMERAINSTRUCTION MANUALModel #119930M 07-21. Pull, Your email address will not be published. Coyotes Beware. If this occurs, simply move the switch to OFF and then push it up to AIM again.SETUP MODEOnce batteries are installed and an SD card is inserted, youre ready to go into the Setup Mode to get the camera ready to use, with all options set to your preferences. Red, green, or blue color casta. OFF mode: Power switch in the OFF position. Read full answer. LCD screen shows a faint black line after turning from AIM to On. Most trail cameras use only one image sensor to capture images 24 hours a day. 0.050-, 1/16-, 5/64-, 3/32-, 7/64-, 1/8-, 9/64- and 5/32-inch keys in a single tool. Each new image or video will be numbered incrementally in order of the time it was captured (first four digits are the same DCIM). Instruction Manual. For warm environ- mental conditions, set the Sensor Level to "High" and for cold weather use, set the sensor for "Low". If this is seen on a consistent basis, then the sensor may need servicing. Photos with streaked subjecta. 6-24x 50mm. CAUTION: be sure to backup and save any/all files you want to keep first, as formatting will clear the card completely of all files-they will then be difficult or impossible to recover from the card.If you are sure you want to format a previously used card, use UP/DOWN to change the N after FOr_ to Y (Yes), then press OK to confirm and delete all files from the card. Check to make sure you have used new alkaline or lithium batteries. You will get the best results when the subject is within the ideal flash range, no closer than 10 (3m) from the camera. It has worked well so I purchased a second. The camera takes continuous images of no subjectA camera has what is known as a false trigger if the PIR sensor thinks that there is motion and heat in front of the camera lens when there is no subject in the image. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: The device does not contain any user-serviceable parts. PUSH/PULL PIN Push down on pin or pull shaft, According to the usage scenario and working concept, this system only supports instant communication through WiFi hotspot function, Your email address will not be published. Excursion HD Binoculars Rechargeable batteries are not recommended. Sensing Angle and Distance TestTo test whether the Prime L20 Trail Camera can effectively monitor the area you choose, this test is recommended to check the sensing angle and monitoring distance of the Prime L20 Trail Camera. If you are only using a single camera to monitor an area, simply leave it set to the default Id: 01. Since unmounting the camera and taking it to your computer isnt very convenient, you may find it easier to just take the card out. The flash will stop operating near the end of the battery life.b. See Prices; 2. If you would like to change your settings or withdraw consent at any time, the link to do so is in our privacy policy accessible from our home page.. If you dont save your new setting after changing it, the camera will continue to use the original default setting for that parameter. Thread the end of the strap through the buckle. Setting a camera up over water is also a potential cause of this issue. To download your photos/videos to a PC or Mac*, first make sure the Prime L20 Trail Camera power switch is in the OFF position. 3, these keys are UP, DOWN, and OK. Two of the keys can also perform a second function (shortcut operations in AIM mode) in addition to their main function: The DOWN key can be used to set the camera to Photo mode (still camera icon), and the UP key can set the camera to Videomode (movie camera icon). Each new image or video will be numbered incrementally in order of the time it was captured (first four digits are the same DCIM). To get the optimal picture quality, the tree should be about 16-17 ft. (5 meters) away from the place to be monitored, with the camera placed at a height of 3.5-5 ft. (1~1.5 m). : DO NOT USE the 1s Interval setting for Video at night at a feeder or similar environment. Make sure that the light sensor will not be in the shade (from tree leaves/branches) while the camera lens is aimed into a bright area.5. See Prices; Bushnell Digital Camera 78-7348. RCBS. You will also use OFF mode if you connect the camera to a computers USB port later to download your photos/videos. This means it can deliver up to twelve months stand-by operation time when the device is powered by six AA alkaline batteries. It may cause the LEDs to continue firing over a long period of time, which may overheat and shorten the operating life of the internal electronic components.Do not mix old and new batteries.Do not mix battery types-use ALL lithium or ALL alkaline.Rechargeable batteries are not recommended. Filters Update Filters. If there is a setting that you dont need or want to change from the default or current setting, simply press OK to confirm and skip to the next item/option. Please contact Bushnell customer service.7. By removing the SD card (swapping it for a new empty card if you like) and taking it to your home or campsite to view the images by using an SD card reader (user supplied) connected to your computer (some computers and TVs have a built in SD card slot), you can leave the camera in place ready to capture more images. About the Prime L20 Trail CameraThe Bushnell Prime L20 Trail Camera is a digital scouting camera. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ON mode: Power switch in the ON position (LCD screen is off.). To get Started using your Bushnell Trail Camera: 1. "Trail sentury cams will not indicate a 5 digit mode on the screen, but it will show "-----". If you have used an SD card in another device before inserting it in your Prime L20 Trail Camera, you might want to try formatting the card using the Format parame- ter in Setup mode (make sure you have backed up any important files first, as formatting will erase all previous files). The Prime L20 Trail Camera provides the following connections for external devices: USB port and SD card slot (Fig. Name, address and daytime phone # for product return. The Prime L20 Trail Camera will be recognized as a standard USB Mass Storage device (this may take several seconds the first time you connect it). If the camera continues to take images when there is no subject in them, try placing the camera in an inside environment and aiming at a location where there is no motion. There are several different ways this can be done. Try moving the camera to an area that does not have any of these issues or try changing the sensor level on the menu settings. You will also use OFF mode if you connect the camera to a computers USB port later to download your photos/videos. Reviewing Images Directly From the SD CardThis is the most popular method of viewing images. Normally FAT32 is recommended unless you have another image viewer that uses FAT16 format. (do not leave it in AIM). 2021 Bushnell Outdoor Products. Field Scan (Time Lapse) not working properly. Make sure that you have installed all six batteries in the battery compartment. Insert the SD card (with the cameras power switch in the OFF position) before beginning to operate the camera. Love it. With Windows XP or later, you can then simply use the options in the pop-up window to copy, view, or print your photos (right). Remove any limbs which are right in front of the camera lens. eBay item number: 203589901876. Binoculars. When you finish changing a setting (or leaving it set as is), press OK to lock in the setting and move on to the next option/item. 2. british legal technology awards. Does the SD card have sufficient available space and is its write-protection (lock) switch off? Your Bushnell product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. Our Bushnell trail camera reviews combine comprehensive testing . This gives you time to close and lock the front cover of the Prime L20 Trail Camera and then walk away. Press OK to confirm and move on to the next Setup item, Interval Time. If the SD card has its write-protect switch in the lock position, the camera will not take images. Fasten the belt securely around the tree trunk by pulling the end of the strap firmly so there is no slack left. For EU owners, email: contact@bushnell.euBushnell recommends using 6 Energizer Lithium AA batteries in this Prime L20 Trail Camera model to obtain maximum battery life.Do not mix old and new batteries.Do not mix battery types-use ALL lithium or ALL alkaline.Rechargeable batteries are NOT recommended.Bushnell recommends using SanDisk SD and SDHC Cards (up to 32GB capacity) in all Prime L20 Trail Cameras. Brand: Bushnell | Category: Scouting Camera | Size: 1.42 MB. View 360 Image. Dont insert or remove the SD card when the power switch is in the ON position.The Prime L20 Trail Camera uses a standard SD (Secure Digital) memory card to save photos (in .jpg format) and/or videos (in .avi format).
bushnell 119930cwm manual